Filter
Top Products
2322
ATTACHING AND REMOVING THE LENS
Attaching the Lens
1. Remove the camera body
cap and rear lens cap as
shown.
2. Align the red mounting
dot on the lens with the
red dot on the camera.
3. Gently insert the lens into
the mount and turn it
clockwise until it clicks
into the locked position.
•Do not insert the lens at an angle.
•Do not press the lens release when attaching the lens.
1. Press the lens release and
turn the lens counter-
clockwise until it stops.
2. Gently remove the lens
from the mount and
replace the caps, or
attach another lens.
Removing the Lens
Caution
•Do not force the lens if it does not turn smoothly.
•Do not touch the inside of the camera, especially the lens
contacts and mirror.
•Remove dust, dirt, and moisture from the lens mount before
attaching or removing a lens.
•To store the lens hood, reverse it and attach it to the lens, then
replace the lens cap.
A
F
/
M
/M
8
0
80
56
Lens Hood
Use the lens hood to reduce flare and ensure maximum
image quality.
•Remove the lens hood from your lens before using the
camera’s built-in flash.
To attach a bayonet mount lens hood, fit the hood into
the bayonet mount on the end of the lens barrel, then turn
the lens clockwise until it stops.
If your lens and hood have
guide marks, align the red
line on the lens hood with the
red line on the lens, then turn
the lens hood clockwise until
the dot on the lens hood is
lined up with the line on the
lens.