Filter
Top Products
3130
FULL
-
AUTO OPERATION
Full Auto is the camera’s standard operating mode and is
suited for use in almost any situation. When the program-
reset button is pressed, the camera is returned to fully-
automatic operation. See page 96.
1. Press the main switch to
turn the camera on.
2. Press the program-reset
button to set the camera
to Full Auto.
3. Set the format-selector
switch to the desired print
format (C, H, or P).
4. Center your subject in the
focus frame [ ] and press
the shutter-release button
partway down to activate
autofocus. or will
glow when the subject is
in focus.
•The built-in flash will pop-up
and fire when necessary.
5. If you are using a zoom
lens, rotate the zooming
ring on the lens to frame
the subject as desired.
•In low-light conditions, the AF illuminator (flash) will fire to
determine focus distance.
•To take a picture with your subject outside the focus frame [ ]
use focus hold. See page 38.
6. Press the shutter-release
button all-the-way down
to take the picture.