Filter
Top Products
4544
MANUAL-FILL FLASH/FLASH CANCEL
Press the flash mode
button until appears in
the data panel.
•When the program-reset
button is pressed, the camera
returns to the autoflash mode.
In the manual fill-flash mode, the flash fires every time a
picture is taken. When the flash is canceled, the built-in flash
will not fire.
Press the flash mode
button until appears in
the data panel.
•When the program-reset
button is pressed, the camera
is returned to autoflash mode.
•If the flash is canceled in low-
light situations, the shutter
speed may be slow; use a
tripod.
Manual Fill-Flash
Flash Cancel
RED
-
EYE REDUCTION
Press the red-eye-
reduction/wireless-flash
mode button until
appears in the data panel.
• When turned on, the camera
is returned to autoflash with
red-eye reduction or autoflash
without red-eye reduction,
whichever was used last.
When photographing people or animals at night or other low-
light situations, the effect called red-eye may occur due to the
flash reflecting off the inside of the subject’s eyes. To reduce
this effect and to produce more natural looking photographs,
use the built-in flash’s red-eye-reduction mode.
Selecting Red-eye Reduction:
Press the red-eye-reduction/wireless-flash-mode button until
no longer appears in the data panel.
Canceling Red-eye Reduction:
Warn your subject that the flash will fire a few short bursts
just before the picture is taken.
When using Red-eye Reduction: