Filter
Top Products
7170
DATE/TIME IMPRINTING
Before taking the picture-
1. Open the control-panel
door.
•After selecting the desired
date/time format, press the
shutter-release button partway
down to return to the standard
data-panel display; will
remain in the data panel.
•The same format will be printed on the front and the back of
the print.
•If front imprinting is not selected, all the date and time
information will be printed on the back of the photograph.
Imprinting the Date or Time
TITLE IMPRINTING
Three titles from the title list can be preset for use while
taking pictures. Any one of the preset titles can be selected
before the picture is taken. When chosen, the selected title
will be recorded on the film’s IX data strip. At certified
Advanced Photo System photofinishers, the selected title will
be printed on the back of the print.
Some labs may not be able to print the titles in all of the
available languages. See your photofinisher for details.
Three title codes have been set into memory. You can
change one or all three title codes at any time.
1. Select the code for the title you want from the Title
List.
Preselecting Titles
Titles are displayed in the data
panel as a title code. Please
refer to the Title List for the
titles available with this
camera.
2. Open the control panel
door, then press the title
button to display the title
code you want to change.
2. Press the date button
until the data panel
displays the format you
want to see on the print.
The sequence is as follows:
Date -> Time -> (No
Imprinting)