6968
DATE/TIME IMPRINTING
3. Turn the control dial to
adjust the blinking item.
4. Repeat steps 2 and 3 until all items in the date and
time display are correct.
5. Press the date button, or press the select button
until the display stops blinking, to set the updated
information.
•After setting the date/time information, press the shutter-
release button partway down to return to the standard data-
panel display.
•This camera has a quartz clock and automatic calendar
through the year 2029.
•Follow the sequence as stated above. If the wrong button is
pressed, the new data will not be entered.
Changing the Date/Time Format
1. Open the control-panel
door, then press the date
button.
2. Press and hold the select
button until all items in
the date display blink.
3. Turn the control dial to
change the display
format.
The sequence is as follows:
`Y M D -> M D `Y -> D M `Y
4. Press the date button, or press the select button
until the display stops blinking, to set the chosen
format.
•After changing the date/time format, press the shutter-release
button partway down to return to the standard data-panel
display.
•Follow the sequence as stated above. If the wrong button is
pressed, the new format will not be entered.