Filter
Top Products
13
SETTING UP THE CAMERA
When the camera is initially turned on, the
LCD monitor will activate and prompt you to
set the menu language and the date and
time.Turn the camera on by setting the mode
dial to the setup position.The
controller is used to make settings on the
LCD monitor.
JAPANESE
FRANCAIS
DEUTSCH
ENGLISH
Would you like to select
ENGLISH ?
YES
NO
Date/Time set
00:00
1
1
2001
Year
Month
Day
Use the up/down key of the controller to
highlight the desired language.
To select the language, press the center of
the controller. A confirmation screen will
appear.
On the confirmation screen, use the left/right
key to select “YES.”
• Choosing “NO” will cancel the operation
and return to the language selection
screen.
Press the center of the controller to execute
the command.
After the language is set, the date/time screen will appear automatically. Please take time to accu-
rately set the clock and calendar; when an image is taken, the date and time of capture is recorded
with it.
Use the up/down key to highlight in red the
setting to be changed.
• When the hour is highlighted, pressing the
down key will highlight the minutes.
Use the left/right key to change the highlight-
ed setting.
When the date and time have been set,
press the center of the controller.
• A confirmation screen will appear. Use the left/right key to select “YES”; choosing “NO” will cancel
the operation and return to the date/time screen. Press the center of the controller to to execute the
command on the confirmation screen. If an error was made setting the language or date, they can
be reset on the setup menu (p. 38).
Controller
1