Konica Minolta DiMAGE E203 Digital Camera User Manual


 
– Exposure compensation +
MULTI
Reset menu
Movie
Digital zoom
Exp. comp.
White balance
±0
Auto
27
DIGITAL ZOOM
At the maximum telephoto position,
pressing the up key (T) once will acti-
vate the 1.5X digital zoom. Pressing the
up key a second time will increase the
magnification to 2X (1).
When the digital zoom is in use, the
live image is framed in a blue border.
The digital zoom magnification is
displayed on the monitor.
Use the down key (2) to decrease or
cancel the digital zoom.
The digital-zoom is canceled if the
LCD monitor is turned off.
X1.5
X2
2
1
The camera exposure can be adjusted to make the final picture lighter or darker by as much as ±1.5
Ev in 0.3 increments.The exposure compensation must be set before the image is captured and will
remain in effect until it has been reset.
EXPOSURE COMPENSATION
On the multi-function recording menu (p. 24), highlight
the exposure-compensation option and press the right
key of the controller.
The exposure-compensation screen will be displayed
with the live image.
Use the left/right key of the controller
(2) to adjust the exposure-compensa-
tion value.
Change in exposure compensation is
visible in the live image on the
monitor.
The scale is marked in 0.3 Ev
increments.
Press the center of the controller to set the adjustment in exposure.
When the menu is displayed again, the amount of compensation will be shown.
In multi-function recording mode, the digital zoom can double the effect of the optical zoom lens.The
digital zoom magnifies the image in two steps: 1.5X and 2X. Although images are interpolated to their
original image size, image quality may not be equal to images taken without the digital zoom.The
digital zoom is activated on the multi-function recording menu (p. 24). The effect of the digital zoom is
visible on the LCD monitor only.