Filter
Top Products
110
D
ATA-TRANSFER MODE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on the
following page. During installation, if the operating system requests the Windows 98 CD-ROM, insert
it into the CD-ROM drive and follow the accompanying instructions on the screen. No special driver
software is required for other Windows or Macintosh operating systems.
Before connecting the camera to the com-
puter, place the DiMAGE Viewer CD-ROM
in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the starting-up-
the-USB-device-driver-installer button. A
window will appear to confirm that the dri-
ver should be installed; click “Yes” to con-
tinue.
Automatic Installation
Connecting to Windows 98 and 98 Second Edition
When the driver has been successfully
installed, a window will appear. Click “OK.”
Restart the computer and connect the
camera (p. 108) to complete the opera-
tion.