Before starting the E-mail copy routine, select the image size of the copy in the custom 2 section of
the playback menu (p. 84). Two sizes are available: 640 X 480 (VGA) or 160 X 120 (QVGA).
When the image(s) to be converted to an e-mail file are selected, the copy routine will begin and a
screen will appear indicating the name of the folder containing the copied
images; press the central button of the controller to return to the menu. The
same folder is used to store e-mail copies until the number of images exceed
9,999.
Copy
95
After the copy-completed message is highlighted, a new screen will appear to
indicate the name of the new folder containing the copied images; press the
central controller button to return to the menu.
When the image(s) to be copied are selected, a screen with four messages is displayed. The mes-
sages are highlighted during the copying procedure.
Copy
Enter
1
2
3
4
Copying to card.
Copying completed.
Copied to 101MLTEM
OK
E-mail Copy
OK
The copy-unsuccessful message will appear when one or all of the images could not be copied.
Check the memory card to see which files were copied and then repeat the procedure for the
uncopied images.
Camera Notes
Copied to 101MLTCP
When the change-card message is
highlighted, remove the camera’s
memory card and insert the card to
which the image should be copied.
Press the central button of the con-
troller to continue or the menu button
to cancel the copy operation.
Change card.
Copying to camera memory.