Konica Minolta DiMAGE F200 Digital Camera User Manual


 
The response time during recording and playback is longer with
MultiMediaCards compared with SD Memory Cards. This is not a
defect, but rather due to the specifications of the cards. When
using large capacity cards, some operations like deletion may
take longer.
SD Memory Cards have a write-protect switch to prevent image
data from being deleted. By sliding the switch to the bottom of
the card, the data will be protected. However, when the card is
protected, images cannot be recorded. If an attempt is made to
record or delete an image with the camera, the card-locked mes-
sage will appear on the monitor. For memory card care and store
see page 127.
Memory cards should not be used to permanently store image data. Always make a copy of camera
files on an appropriate storage device or recording media. Making an additional backup copy of the
data is recommended. Minolta has no responsibility for any loss or damage to data.
19
If the card-not-recognized message appears, the inserted card in the camera may need to be format-
ted. A card used in another camera may have to be formatted before being used. If the unable-to-
use-card message appears, the card is not compatible with the camera and cannot be formatted. A
card is formatted in the basic section of the setup menu (p. 98). The formatting operation permanent-
ly erases all the data on the card.
About memory cards
Write-
protect
switch
Lock
position