Filter
Top Products
18
G
ETTING UP AND RUNNING
Changing the memory card
An SD Memory Card or MultiMediaCard must be inserted for the camera to operate. If a card has not
been inserted, a no-card warning will automatically be displayed on the monitor and three dashes (–
– –) will be displayed on the data-panel frame counter.
Open the card-slot door by sliding the door toward the bottom of the camera to release the safety
catch (1); the door can then be opened.
Insert the memory card all the way into the card slot and release (2). Insert the card so the face is
toward the front of the camera. Always push the card in straight. Never force the card. If the card
does not fit, check that it is oriented correctly. The card should catch in the slot.
To eject a memory card, press the card into the slot and release (3). The card can now be pulled out.
Take care when removing the card as it becomes hot with use.
Close the battery-chamber door and slide it toward the top of the body to engage the safety catch
(4).
1 234
Always turn off the camera and confirm the power/access lamp is not red
before removing a memory card; damage and data loss may result.