Filter
Top Products
The photographer selects the shutter speed and the
camera sets the appropriate aperture to ensure correct
exposure. When shutter priority is selected, the shutter
speed on the monitor turns blue and a double arrow icon
appears next to it. If the LCD monitor is turned off, the shutter speed is fixed at the last setting and
cannot be changed. The flash mode is set to flash cancel. Fill-flash and fill-flash with red-eye reduc-
tion can be selected (p. 32).
59
Shutter priority - S
Because the maximum aperture is not the same at the wide-angle and telephoto position, as the lens
is zoomed, the aperture will automatically shift. If the aperture value is beyond the shutter-speed
range, the shutter-speed display will turn red on the monitor.
Use the up/down keys of the con-
troller (1) to set the shutter speed.
Press the shutter-release button to
activate the exposure system; the
corresponding aperture will be dis-
played on the monitor.
The shutter speed can be set between 1/1000 and 15 seconds. If the shutter speed is beyond the
aperture range, the aperture display will turn red on the monitor.
1