Konica Minolta DiMAGE F200 Digital Camera User Manual


 
Press the shutter-release button partway down
(1) or press the central button of the controller
(2) to select the area; the other four areas will
disappear. Focus and exposure are locked when
the shutter-release button is pressed partway
down. Press the shutter-release button all the way down to
take the picture.
Once a focus area is selected, it will remain active even after
the picture has been taken. Only when a focus area has been selected, can the
controller be used for other camera operations.
52
A
UTO-RECORDING MODE - ADVANCED OPERATION
Press and hold the central button of the controller until the Area-AF frame lines
change to the spot-focus-area display. Press and hold the controller again to return to
the Area-AF frame lines.
Focus area selection
Use the four-way key of the controller to highlight the
desired autofocus area; the active area is blue.
Press the central button of the controller to display all five focus areas. To use another
focus area, repeat the procedure. Press and hold the central button of the controller
about one second to return to the Area AF focus frames.
1
2
Individual focus areas can be selected in the auto recording and multi-function recording modes. In
the multi-function recording mode, focus area selection can also be used with Subject Tracking AF,
see page 66.