Filter
Top Products
15
INSERTING THE BATTERY
This digital camera uses one NP-700 lithium-ion battery. Before using the battery, read the safety
warnings on pages 3 and 4 of this manual. When replacing the battery, the camera should be
turned off (p.19).
1. Slide the battery-chamber door toward the front of the camera to release the safety catch. Open
the door.
2. Slide the battery into the battery chamber with the battery terminals first.
3. Close the battery-chamber door and slide it toward the back of the camera to engage the safety
catch.
After installing the battery, the set-time/date message may appear on the monitor, see page 20 on
how to set up the clock. An internal battery protects the clock, calender, and memory settings for
more than 24 hours if the camera is used for at least 5 minutes before removing the battery.
1
32