Filter
Top Products
18
G
ETTING UP AND RUNNING
INSTALLING AND REMOVING A MEMORY CARD
An SD (Secure Digital) Memory card or MultiMediaCard must be inserted for the camera to operate.
If a card has not been inserted, a no-card warning appears on the LCD monitor; the shutter can still
be released, but no image is captured.
Always turn off the camera and confirm the indicator lamp is not lit before changing the
memory card, otherwise the card may be damaged, and data lost.
1. Slide the card-chamber door toward the
back of the camera to release the safety
catch. Open the door.
2. Insert the memory card all the way into
the card slot and then release. The card
should catch in the slot.
Insert the card so the face is toward the
back of the camera. Always push the card
in straight, never at an angle. Never force
the card. If the card does not fit, check
that it is orientated correctly. If a
MultiMediaCard is inserted incorrectly, it
will lock, but the card chamber door will
not close.
3. To eject a memory card, press the card
into the slot and release. The card can
now be pulled out.
4. Close the card-chamber door and slide it
toward the camera to engage the safety
catch.
1
2
3
4