Filter
Top Products
78 Setup mode
VIDEO OUTPUT
Camera images can be displayed on a television. The video output can be changed between NTSC
and PAL in section 3 of the setup menu. North America uses the NTSC standard and Europe uses
the PAL standard. Check which standard is used in your region to play back images on your televi-
sion set.
VIEWING IMAGES ON A TELEVISION
The supplied AV cable is used to view camera images on your television.
1. Turn off the television and the camera.
2. Slide the terminal cover open. Insert the small plug of the AV
cable into the camera’s AV-out terminal. The arrow mark on the
plug should face the front of the camera.
3. Plug the other end of the AV cable into the video and audio
input terminals on the television. The yellow plug is for the
video output. The white plug is for the monaural audio output.
4. Turn the television on.
5. Change the television to the video channel.
6. Press and hold the playback button until the playback display is
visible on the television screen. The camera’s monitors do not
activate when the camera is attached to a television.
7. View images as described in the playback section.
2
3
6