Filter
Top Products
73
If file number memory is selected, when a new folder is created, the first file stored in the folder will
have a number one greater than the last file saved. If the file number memory is disabled, the image
file number will be 0001. File number memory is activated in section 1 of the setup menu (p. 70).
If file number memory is active and the memory card is changed, the first file saved to the new card
will have a number one greater than the last file saved on the previous card if the new card does not
contain an image with a greater file number. If it does, the file number of the new image will be one
greater than the greatest on the card.
FILE NUMBER (#) MEMORY
FOLDER NAME
All recorded images are stored in folders on the memory card. Folder names
come in two formats, standard and date.
Standard folders have an eight character name. The initial folder is named
100KM007. The first three digits are the folder’s serial number, which will
increase by one each time a new folder is created. The next two letters refer to
Konica Minolta, and the last three numbers indicate the camera used; 007 indi-
cates a DiMAGE X50.
A date folder name also starts with the three digit serial number and is followed
by one register for the year, two register for the month, and two registers for the
day: 101YMMDD. The folder 10140824 was created in 2004 on August 24th.
With the date folder format selected, when an image is recorded a new folder
with the day’s date will be created. All images recorded that day are placed in that folder. Images
recorded on a different day are placed in a new folder with the corresponding date. If the file num-
ber memory function is off, when a new folder is created, the serial number in the image-file name is
reset to 0001. If file number memory function is on, the serial number in the image-file will be one
greater than the last image saved. For more information on folder organization and file names, see
page 84.
100KM007
(Standard)
10140824
(Date)