Filter
Top Products
85
E-mail Copy images are placed in a folder ending in “EM.” When a new folder is created, the first
three digits in the folder name will be one greater than the largest folder number on the card. When
the index number in the image file name exceeds 9,999, a new folder is created with a number one
greater than the greatest folder number on the memory card: e.g. from 100KM007 to 101KM007.
The number in the image file name may not correspond to the frame number of the image. As
images are deleted in the camera, the frame counter will adjust itself to show the number of images
on the card and reassign the frame numbers accordingly. The serial numbers used with image files
will not change when an image is deleted. When a new image is recorded, it will be assigned a
number one greater than the largest serial number in the folder. File serial numbers can be con-
trolled with the file-number-memory function in section 1 of the setup menu (p. 73).
Image files contain exif tag data. This data includes the time and date the image was recorded
as well as the camera settings used. This data can be viewed with the camera or the DiMAGE
Viewer software. If a camera image is opened in a image-processing application that does not
support Exif tags, and then the image is saved overwriting the original data, the exif tag infor-
mation is erased. Some Exif compatible applications rewrite the Exif data preventing the
DiMAGE Viewer from reading it. When using software other than the DiMAGE Viewer, always
make a backup copy of the image files to protect the exif tag data.
To view images correctly on your computer, the monitor’s color space may need to be adjust-
ed. Refer to your computer manual on how to calibrate the display to the following require-
ments: sRGB, with a color temperature of 6500K, and a gamma of 2.2.
Camera Notes
AUTO POWER SAVE - DATA-TRANSFER MODE
If the camera does not receive a read or write command within ten minutes, it will shut down to
save power. When the camera shuts down, an unsafe-removal-of-device warning may appear on
the computer monitor. Click “OK.” Neither the camera or computer will be damaged in this opera-
tion. Unplug the USB cable and turn off the camera. Remake the USB connection by reattaching
the cable and turning the camera on.