Filter
Top Products
81
CONNECTING TO WINDOWS 98 AND 98SE
The driver needs only to be installed once. If the driver cannot be installed automatically, it can be
installed manually with the operating system’s add-new-hardware wizard; see the instructions on
the following page. During installation, if the operating system requests the Windows 98 CD-ROM,
insert it into the CD-ROM drive and follow the accompanying instructions on the screen. No special
driver software is required for other Windows operating systems.
Before connecting the camera to the com-
puter, place the DiMAGE Viewer CD-ROM
in the CD-ROM drive. The DiMAGE
installer menu should automatically acti-
vate. To automatically install the Windows
98 USB driver, click on the “Starting up
the USB device driver installer” button. A
window appears to confirm that the driver
should be installed; click “Yes” to contin-
ue.
Automatic Installation
A message appears when the driver has
been successfully installed. Click “OK.”
Restart the computer before connecting
the camera (p. 80).