Filter
Top Products
Refer to the applications instruction manual on how the view the
remote feed. With Microsoft Net Meeting, simply click on the play
button. The option dialog box allows remote control over some of
the camera’s functions. By clicking on the source button
in the video tab, zoom and focus controls can be
accessed; the controls are located on the camera control
tab of the dialog box. Image magnification
can be adjusted with the zoom slider.
Clicking the auto check box on the focus
option focuses the camera. However, focus
is not continuous and the box must be
checked each time focusing is required.
99
NOTES ON REMOTE CAMERA OPERATION
When using the remote camera, exposure, white balance, and camera sensitivity are set to auto.
The optical and 4.3X digital zoom are active. There are no menu controls. The monitor cannot be
turned off. The flash is disabled. There is no audio.
The camera can be focused periodically by pressing the shutter-
release button partway down. The AF system does not continually
focus when the button is pressed and held so the operation should
be repeated as the subject distances changes.
Because of the data rate, there may be delays when the camera is
focused or zoomed.