Filter
Top Products
86 Data-transfer mode
DISCONNECTING THE CAMERA FROM A COMPUTER
Windows XP, 2000 Professional, and Me
To disconnect the camera, click once on the unplug-or-eject-hardware icon located
on the task bar. A small window opens indicating the device to be stopped.
When more than one external device are connected to the computer, repeat the procedure above
except right click on the unplug-or-eject-hardware icon. This will open the unplug-or-eject-hardware
window after clicking on the small window indicating the unplug-or-eject-hardware routine.
Click on the small window to stop the
device; the safe-to-remove-hardware
window opens. Click on “OK” to close
the window, turn the camera off, and
then disconnect the USB cable.
Confirm that the access lamp is not lit. Turn the camera off, and then disconnect the USB cable.
Windows 98 / 98 Second Edition
Never disconnect the camera when the viewfinder lamp is lit - the data or memory card may
permanently be damaged.