Filter
Top Products
111
Automatic rewind of fully exposed film
The film starts to rewind automatically after the last exposure at
the end of the film. The frame counter in the data panel (19)
counts backwards, with the frame numbers and segments run-
ning backwards as confirmation of rewinding appearing alter-
nately. The motor stops when the film is rewound. The
0
in the
counter flashes to indicate that the completely rewound film can
now be removed.
Important: If the motor stops without the
0
in the data panel
flashing, the battery needs to be replaced. Do not open the back
of the camera or the partially rewound film will be exposed to the
light, making it unusable, the shots taken will be ruined. After in-
serting the new battery, press the mid-roll rewind button (26) on
the bottom of the camera to continue rewinding the film.
Rewinding a partially exposed film
The motorized film rewind can be activated manually at any time,
so that a partially exposed film can be developed, for example.
To do this, press the mid-roll rewind button (26) on the bottom of
the camera using a ballpoint pen or similar object.
Accessories: Order No.
Carrying Strap, approx. 50cm long
(supplied with camera – replacement) 18529
Wrist strap (supplied with camera – replacement)
18528
LEICA Electric Cable Release (approx. 30cm long)
18 540
Leather case with belt loop 18560
LEICA Mini Tripod 14320
English