Filter
Top Products
72
Operating step
1. Press and hold down the DATE button (23) (min. 2s).
2. Turn the main control dial (18) to the right (clockwise) to in-
crease the value or to the left (anticlockwise) to reduce it.
Note: The values are arranged in an “endless loop”, i.e.
they can be reached by turning the dial in either direction
(from
4
to
6
).
3. Briefly press the DATE button.
4. Set the 4 remaining values – Month/Day/Hour/Minute –
as described in steps 2 and 3.
5. Pressing the DATE button briefly for a fifth time stores your
entries.
Displays in the data panel
The left-hand numerical display flashes (after the button is
released for a further 4s) to indicate that setting is possible
during this time.
Note: Each time the main control dial is moved (18, see point 2)
the flashing/the available setting time is extended by a
further 4s.
The other displays disappear.
Note: The display switches to Year/Month/Day
The value changes accordingly.
The central digit group flashes.
As for points 1 and 2.
The display stops flashing as confirmation.
Note: The year is indicated by an apostrophe.