Filter
Top Products
Chapter 1 Hardware Installation
1.4 Real Time Display Card Installation
The Real Time Display card is capable of feeding 480 fps to 16 video channels with each channel
running at 30 fps. Video can also be displayed to a TV monitor by using the TV-out connector. The
card is designed to work conjunctionally with your GV series video capture card; therefore, a direct
connection between both cards is required. The current model that supports Real Time Display
cards are GV600, GV650, GV750, and GV800.
1. Insert the Real Time Display card into the PCI slot next to the GV-Series video capture card.
2. Use the supplied ribbon cable, connect one end of the ribbon cable to the GV capture card and
the other end to the Real-time Display card as illustrated in the following picture.
3. Now select the driver path in the CD directory \Driver\GVDSP to install the driver.
GeoVision GV-600v2
GV-600 v2
Real Time Display CardTV Monitor
Note:
1. The Real-Time Display card is not compatible with VIA chipset motherboards.
2. The VGA card requirement for Real-Time Display card must be GeForce 2 or above.
Page 8
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE