Filter
Top Products
Chapter 3 Main System Application
Video Attribute Setup
The Video Attribute Setup allows you to separately adjust each camera’s video characteristic.
There are four parameters available: Brightness, Contrast, Saturation, and Hue. Use the slider
bar next to each parameter and adjust them to your preference. You may use the default
button to reset all four parameters. Use the Camera Select button to select between cameras
or you may also use the Apply All button to apply your setting to all cameras.
Camera Select Apply All
Default Button
Full Screen
Click [Configure] button, select [Full Screen] from the menu, and the system will switch to
full screen display. Point your mouse to the camera view window, right click on the mouse and
select [Full Screen Mode Switch] to switch back to normal screen display.
Page 48
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE