Filter
Top Products
Chapter 3 Main System Application
[Monitor Control]
Apply to all camera
Recording codec
Select alarm type
Notice level
Specify Output Pin
Rec Video: Click this option to enable or disable this camera’s recording function. The
drop-down-menu allows you to choose between [Motion Detect] or [Around the Clock]
recording mode. Click on the recording codec button to select between Wavelet and Mpeg 4
recording format.
Invoke Alarm: By enable this camera’s Invoke Alarm option the system will be able to
generate a alarm sound when the camera detects a motion. There are 7 types of alarm sound
to choose from in the Alarm type drop-down menu.
Invoke E-Mail Alerts: Enable this function and the system will send E-mail alerts when
motions are detected. You may use the slider bar to select notice interval, whereas [High] =
0.5 second, [Medium] = 1 sec., and [Low] = 1.5 sec.
Send to Center: If you have installed Center at a remote site or you have applied the
service to Center, You may define how to send the live video to Center, by either [Motion
Detect] or [Round-the-Clock] functions.
Output Module: Set the output of the camera to the module when invoked. The maximum
controlled output is 9 modules, with 8 pins for PT811Device and 16 pins for GV-IO Device.
[Video Resolution]
Allow you to adjust camera’s video characteristic such as brightness, contrast, saturation,
and hue.
Page 34
DVR-9404~9408~9416
Mace Security Products
FOR ADDITIONAL QUESTIONS CONTACT TECHNICAL SUPPORT TEAM @ 1 (866) 392-MACE