Filter
Top Products
39
Automatic Size and Skew detection
Disable
This option outputs the image as it was scanned.
End of Page Detection
Scanning with the ADF and page length detection selected will output data for the page
size detected.
The image data output will adjust to the page length detected for each page including
smaller size pages.
Data cannot be output for page sizes greater than the length setup in [Page Size].
This function does not work properly for some applications.
Automatic Deskew
When scanning with the ADF, this option detects skew of the document being fed and
automatically corrects the skew.
Automatic Page Size Detection
Scanning with the ADF and Automatic Page Size Detection selected, the output will
adjust to the page size detected.
Document skew can be detected and can be corrected for the output image.
Output data size will be equal to each document scanned in a multi page scan. When
page size is detected incorrectly, set up the [Page size] to the largest size page in the set.
For example, With Automatic Page Size Detection is selected, it also need to select a
Paper Size (example: Double Letter 11"x17") in the set. If any paper size within the
selected (Double Letter) paper size range is used for scanning, the output will adjust to
the page size detected.
(However, in case of fi-4860C2/fi-5650C/fi-5750C, this function is not dependent on
the setting of [Paper size] because these scanners always scan documents as the
maximum paper size and detect the paper size from the scanned data.)
This function does not work properly for some applications.
However, some detection cannot be corrected for example, an unfixed long image,
folded corner, document has uneven width for the length of the page.
Page size may not be detected correctly when documents are scanned with the Flat bed.
However, in case of fi-5750C/fi-6230/fi-6240/fi-6750S/fi-6770(A), this function can
work correctly with flat bed scanning when “Document holding pad (black)” option
(sold separately) is attached on the scanner.
Automatic Paper Size Detection may fail if Edge Emphasis is selected.
Black Background
If it is selected, the outside of document paper becomes black by using black
background during scanning.