Microsoft 9.19 Photo Scanner User Manual


 
41
The output order of the back side images scanned in Duplex mode.
When "Book" is selected under [Flip Side Rotation]
Third page : The upper half on the back side
Fourth page : The lower half on the back side
When "Fanfold" is selected under [Flip Side Rotation]
Third page : The lower half on the back side
Fourth page : The upper half on the back side
* Split image is not supported in all scanner models. See “Relevant Image Scanner
Specification” in the Appendix.
* The [Blank page skip] function is valid for each split (upper and lower) half.
When either of the upper and lower halves is blank, only the blank half (one page) is
skipped.
* When [Digital Endorse] is enabled, a character string is printed on each separate page.
* When this function is enabled, [Multi Image] or [Color/ monochrome Auto Detection]
cannot be enabled, and vice versa.
* This function is disabled when you select [Double-page spread], [Clipping (Front)] or
[Clipping (Duplex)] for [Scan Type].
Overscan
This function makes the scanned images larger than the original documents by adding
margins. This option is available only when [Black Background] or [White Background] is
selected for [Automatic Size and Skew detection].
This option may not be supported for some scanners. See "Relevant Image Scanner
Specification" in the Appendix.
Cutting out Size
Depending on the size of the document, crops the image from all sides based on the
cropping width specified.
This can be set only when [Automatic Page Size Detection] is selected in [Automatic Size
and Skew Detection].
* If the document is cropped a little larger than its actual size, there will be black margins
on the outer edge of the image.
* If the document is cropped smaller than its actual size, the area around the edges of the
document will be deleted.
* If the specified setting surpasses the largest scanning size, this largest size will be used.