Filter
Top Products
61
♦ Power Mode
Quick Start Mode
This mode keeps the lamp on regardless the scanner’s operating condition, which saves
times for lamp to become steady.
Low Power Mode
To save the power consumption, this mode turns the lamp off, if the scanner is not
operated for 14 minutes.
♦ Enable Low Speed Feeding
This is to specify to obtain a high quality image.
This function reduces times of start/stop during the scanning to obtain a smooth and high
quality image.
♦ Prefer Scanning Speed
This mode makes scanning speed becomes faster in color/grayscale scanning.
When checking this check box, scanning speed becomes faster, but image quality is slightly
deteriorated.
Check this check box, when giving priority to scanning speed over image quality.23
Depending on the scanner model, resolution and paper size, this setting may remain
disabled even after you enable it.
♦ Scanner Operation Panel
− Enable Scanner Panel
This is to specify whether the operator panel is enabled or not. If this is checked, button
operation on the operator panel becomes effective. (Note that the operator panel is
enabled only during the driver is activating.)
− Enable Scanner Dial
Specifies whether the value indicated by the density dial on the scanner is reflected on
scanning or not.