Filter
Top Products
96
The Setup Menu
General Camera Setup
Format memory/
Format card
Allows you to format the internal memory (only when a
memory card is not inserted) or the memory card (when a
memory card is inserted).
• All data stored in the internal memory or on the
memory card is deleted during formatting and
cannot be restored. Be sure to save important images
by transferring them to a computer before formatting.
E77
Language Allows you to change the camera’s display language. E78
TV settings
Set these settings to match your TV. You can select the
video output mode (NTSC or PAL) and adjust HDMI
output settings.
E79
Charge by computer
When set to Auto (default setting), you can charge the
camera’s battery by connecting the camera to a computer
(provided that the computer is able to supply power).
• When charging by computer, it may take more time to
charge the battery than when using the Charging AC
Adapter EH-69P. Additionally, when charging by
computer and transferring images to the computer, it
takes more time to charge the battery.
E80
Blink warning
Immediately after taking a picture using face detection
(A73) (except when using smart portrait mode), if the
camera detects a subject with closed eyes, the camera
displays the message Did someone blink?, allowing you
to check the image. The default setting is Off.
E82
Eye-Fi upload
Set whether or not to enable the function for sending
images to a computer using a commercially available
Eye-Fi card. The default setting is Disable.
E84
Filmstrip
When On is selected, thumbnails of previous and
subsequent images are displayed at the bottom of the
monitor when you rotate the multi selector quickly while
viewing an image in full-frame display (A32). The default
setting is Off.
E85
Reset all
Allows you to reset the camera’s settings to their default
values.
• Certain settings such as Time zone and date and
Language are not reset.
E86
Firmware version View the current camera firmware version. E89
Option Description A