Filter
Top Products
Troubleshooting
Technical Notes and Index
F12
The saved images are not
displayed in auto sort
mode.
• The desired image was sorted to a category
other than the category currently displayed.
• Images saved by a camera other than the
COOLPIX S6300 and images copied using the
Copy option cannot be displayed in auto sort
mode.
• Images saved in the internal memory or on the
memory card may not be played back correctly
if overwritten by a computer.
• Up to 999 images and movies in total can be
added to each category. If the desired category
already contains 999 images or movies in total,
new images or movies cannot be added.
78, E10
78, E10
–
78, E10
Nikon Transfer 2 does not
start when camera is
connected.
• Camera is off.
• Battery is exhausted.
• USB cable is not correctly connected.
• Camera is not recognized by the computer.
• Confirm system requirements.
• Computer is not set to start Nikon Transfer 2
automatically. For more information about
Nikon Transfer 2, refer to help information
contained in ViewNX 2.
23
22
81, 84
–
82
84
The PictBridge startup
screen is not displayed
when the camera is
connected to a printer.
With some PictBridge-compatible printers, the
PictBridge startup screen may not be displayed
and it may be impossible to print images when
Auto is selected for the Charge by computer
option in the setup menu. Set the Charge by
computer option to Off and reconnect the
camera to the printer.
96, E80
Images to be printed are
not displayed.
• Memory card contains no images. Replace the
memory card.
• Remove the memory card to print images from
the internal memory.
• Images captured using 3D photography
cannot be printed.
20
20
41
Cannot select paper size
with camera.
Paper size cannot be selected from the camera in
the following situations, even when printing from
a PictBridge-compatible printer. Use the printer to
select paper size.
• The printer does not support the paper sizes
specified by the camera.
• The printer automatically selects the paper size.
81, E27,
E28
–
Problem Cause/Solution A