Filter
Top Products
E67
Reference Section
Vibration Reduction
You can select the vibration reduction setting used when shooting. Vibration reduction
allows you to reduce the effects of camera shake, which commonly occurs when shooting
with zoom applied or when shooting at slow shutter speeds. The effects of camera shake are
reduced when recording movies, in addition to when shooting still images.
Set Vibration reduction to Off when shooting using a tripod to stabilize the camera.
The icon for the current setting is displayed in the monitor when the camera is in shooting
mode (A 8). No icon is displayed when Off is selected.
d button M z menu icon M Vibration reduction M k button
Option Description
V On (hybrid)
Images are corrected optically using the lens shift method to reduce the
effects of camera shake when shooting still images, and under the following
conditions, images are processed and corrected before saving them.
• When the flash does not fire
•
When the shutter speed is slower than 1/30 second (at the maximum
wide-angle position) or 1/250 second (at the maximum telephoto position)
• When the self-timer is off
• When Single is selected for the Continuous setting
• When ISO sensitivity is 200 or lower
g On (default setting) The effects of camera shake are reduced using the lens shift method.
Off Vibration reduction is disabled.
B Notes About Vibration Reduction
• After turning on the camera or after switching from playback mode to shooting mode, wait for the
shooting mode screen to be displayed completely before taking pictures.
• Due to characteristics of the vibration reduction function, images displayed in the camera’s
monitor immediately after shooting may be displayed blurry.
•
Vibration reduction may be unable to completely eliminate the effects of camera shake in some situations.
•
When camera shake is extremely high or low, images may not be corrected even when this feature is set to
On (hybrid)
.
• When the shutter speed is fast or extremely slow, images may not be corrected even when this
feature is set to On (hybrid).
• When this feature is set to On (hybrid) and images are corrected, it takes more time than normal
to save images. This is because when you take a picture, the shutter is released twice automatically
in order to correct the image. Shutter sound (E70) is heard only once. One image is saved.