Filter
Top Products
E86
Reference Section
Error Messages
Display Cause/Solution
A
O
(flashes)
Clock not set.
Set date and time.
E60
Battery exhausted. Replace the batteries. 14
The camera will turn off
to prevent overheating.
Either the inside of the camera or the batteries have become
hot.
The camera turns off automatically. Allow the camera or the
batteries to cool down before turning the camera on again.
23
Q
(flashes in red)
Camera cannot focus.
• Refocus.
• Use focus lock.
28, 71
70
Please wait for the
camera to finish
recording.
Wait until the image is saved and the message disappears
from the display.
–
Memory card is write
protected.
Write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.
–
Not available if Eye-Fi
card is locked.
Eye-Fi card write-protect switch is in “lock” position.
Slide write-protect switch to “write” position.
–
Error accessing Eye-Fi card.
• Check that terminals are clean.
• Confirm that the card is correctly inserted.
16
16
This card cannot be
used.
Error accessing memory card.
• Use approved card.
• Check that terminals are clean.
• Confirm that the card is correctly inserted.
F20
16
16
This card cannot be
read.