Nikon Capture 3 Digital Camera User Manual


 
37
Device Registration: D100/COOLPIX-Series Cameras
Windows 2000 Professional
The following explanation uses D100 as an example.
After installing Nikon Capture 3 and restart-
ing the computer, connect your camera to the
computer using a USB cable and turn the cam-
era on . The camera will be registered auto-
matically.
Follow the instructions below to check that the camera has been correctly registered with the
system.
Step 1
Right-click the My Computer icon on the
desktop. Open the System Properties dialog
by selecting Properties from the menu that
appears. Open the Hardware tab and click
the Device Manager… button in the Device
Manager area.
Logging On
Log on as Administrator to register the camera.
Before Connecting the Camera
Be sure to install Nikon Capture 3 before connecting your camera to the computer.
Step 2
The Device Manager will be displayed. After
confirming that Disk drives, Storage vol-
umes, and Universal Serial Bus controllers
are listed in the Device Manager, click the plus
sign (+) next to each of these device types.