Filter
Top Products
39
Device Registration: D100/COOLPIX-Series Cameras
Windows Millennium Edition (Me)
The following explanation uses D100 as an example.
After installing Nikon Capture 3 and restart-
ing the computer, connect your camera to the
computer using a USB cable and turn the cam-
era on . The camera will be registered auto-
matically.
Follow the instructions below to check that the camera has been correctly registered with the
system.
Step 1
Right-click the My Computer icon on the
desktop. Open the System Properties dialog
by selecting Properties from the menu that
appears. Click the Device Manager tab.
Before Connecting the Camera
Be sure to install Nikon Capture 3 before connecting your camera to the computer.
Step 2
After confirming that Disk drives, Storage
device, and Universal Serial Bus control-
lers are listed in the Device Manager tab, click
the plus sign (+) next to each of these device
types.