42
Windows
Device registration is now complete. Click OK to close the System Properties dialog.
Step 3
Confirm
that NIKON D100, Nikon Digital Camera Controller, and Nikon Digital Camera
Mass Storage Driver are listed respectively under Disk drives, Hard disk controllers, and
Universal Serial Bus controllers. Double-click each of these listings to open the associated
Properties window.
If the Nikon Digital Camera D100 is listed
under Other devices, reinstall the device
driver as instructed in “Reinstalling the Device
Driver” ( 55).
If the three drivers above are not listed in the Device Manager and Nikon Digital Camera
D100 is not listed under Other devices, disconnect the camera and restart the computer.
When the computer has restarted, reconnect the camera to the computer.
Step 4
The properties for the selected devices will be displayed. Click the General tab and confirm
that This device is working properly appears under Device status. Click OK.