Filter
Top Products
25
Number of Exposures Remaining
If the number of exposures remaining is zero, the message “OUT OF MEMORY” will be
displayed in the monitor. No further pictures can be taken until:
• a new memory card is inserted ( 16)
• pictures are deleted ( 116)
It may also be possible to take additional pictures at a lower image quality or size (
54).
Using the Self-Timer
The self-timer can be used to delay shutter release by three or ten seconds. See “Basic
Photography: Focusing Near and Far” ( 34).
Shooting mode
The current shooting
mode or scene selec-
tion is displayed here.
Number of exposures
remaining
The number of pictures
that can be stored on a
memory card depends
on the capacity of the
card and the current
image quality and size.
Shutter speed
Aperture
Choose from four op-
tions depending on how
picture will be used (
54). The default setting
is NORMAL.
Image size
Choose from six op-
tions depending on
how picture will be
used (
55). The de-
fault setting is
(2592 × 1944).
Flash mode
Choose from six options depending on lighting
and your creative intent ( 32). At the default
setting (auto), the fl ash fi res automatically when
lighting is poor. No icon is displayed in auto
mode.