Nokia Remote Camera Digital Camera User Manual


 
First start-up
13
Copyright © 2005 Nokia. All rights reserved.
Check the model number of any charger or power supply before use
with this device. This device is intended for use when supplied with
power from the Nokia power supply AC-12.
Warning: Use only batteries, power supplies, and
enhancements approved by Nokia for use with this particular
device. The use of any other types may invalidate any approval
or warranty, and may be dangerous.
For availability of approved enhancements, please check with
your dealer. When you disconnect the power cord of any
enhancement, grasp and pull the plug, not the cord.
6 Press the power button (1) for 2 seconds to switch on the camera.
The light indicators scroll up and down (2).
Figure 7
Warning: Do not switch on the Nokia Remote Camera when
wireless phone use is prohibited or when it may cause
interference or danger.
7 If the PIN code query is disabled on the SIM card, proceed to step 8.
If the PIN code query is enabled on the SIM card, the light indicators
blink the letter and you must enter the PIN code of the SIM card:
Press the power button with short presses until the first digit of
the PIN code appears on the light indicators. Wait for 3 seconds.
When the light indicator blinks, press the power button
with short presses until the second digit of the PIN code appears
on the light indicators. Repeat until you have entered the entire
PIN code. If you miss a digit, keep pressing the power button
until the digit re-appears.