Filter
Top Products
First start-up
14
Copyright © 2005 Nokia. All rights reserved.
If you enter a wrong digit, press the power button with short
presses until the letter is displayed. Wait for 3 seconds, and
re-enter the PIN code from the start.
When you have entered all the digits of the PIN code, wait for
10 seconds. If you entered the PIN code correctly, the light
indicators scroll up and down until the camera is connected to
the network. The camera stores the PIN code in its memory and
uses it automatically each time the camera is switched on.
If you entered the PIN code incorrectly, the light indicators blink
red, and you must enter the PIN code again.
If you enter a wrong PIN code three times in a row, the SIM card
is blocked. To unblock the SIM card, insert the SIM card to your
compatible mobile phone, and enter the PIN unblocking key
(PUK) code, enter the PIN code twice, and reinsert the SIM card
in the camera. For details about the PUK code, contact your
service provider.
8 Set yourself as the master user of the camera using your own mobile
phone. The camera can only be configured with the master user’s
mobile phone.
Create a user name for yourself, and send the following text message
to the phone number of the SIM card in the camera:
6 your user name
indicates a space.
The maximum length of the user name is 20 characters and it must
not contain any special characters or spaces.
Example:
You are now set as the master user of the camera. See “User settings”
on page 33.
6 Helen