198
E
TROUBLESHOOTING
Operating Problems
The camera does not work.
1 The power is OFF.
[ Open the lens barrier to turn on the power. (P. 60)
2 The batteries are loaded incorrectly.
[ Reload the batteries correctly. (P. 52)
3 The batteries are exhausted.
[ Replace the batteries with new ones. (P. 52)
4 The batteries are temporarily unable to function.
[ Keep the batteries warm while using the camera.
No picture is taken when the Shutter release button is
pressed.
1 The flash has not finished charging or the previous picture
is being written into the SmartMedia.
[ Remove your finger from the Shutter release button
and wait until the Green lamp or the Orange lamp stops
blinking. (P. 72/92)
2 SmartMedia is full.
[ Replace the SmartMedia, erase unwanted pictures, or
transfer the entire picture data to a computer and erase
the data. (P. 144/150)
3 No SmartMedia is in the camera or it is protected.
[ Use a new SmartMedia.
The flash does not fire.
1 The flash is not up.
[ Push up the flash. (P. 92)
2 The subject is lighted.
[ Set the flash to Fill-In mode. (P. 94)