Filter
Top Products
128
Customizing the settings/functions of your camera
8
V button function
This lets you replace the function assigned to the V (one-touch WB) button
by registering another function.
1 Menu [] [V FUNCTION]
2 Use ac to set.
[V] One-touch white balance button
(factory-default setting)
[TEST PICTURE]
This enables you to check the picture
you have just taken on the monitor
(REC VIEW feature) without having to
record the picture to the card. This is useful when you want to see how
a picture turned out before saving it.
[MY MODE]
While holding down the V button, you can take pictures using the
camera settings registered in the [MY MODE SETUP]
(g See below).
[PREVIEW]
While holding down the V button, you can use the preview function.
(g P. 47)
3 Press the i button.
You can register 2 different combinations of camera settings and temporarily call
up one of the registered settings while taking pictures. You can use My Mode by
setting the
V
button to [MY MODE]. Take pictures while pressing the
V
button.
Set the menu in advance to differentiate between which of the two MY MODE
SETUP settings to use.
1 Menu [] [MY MODE SETUP]
2 Use to set.
[MY MODE1] / [MY MODE2]
• If menu settings have already been
registered, [SET] is displayed next to the
corresponding reset option.
3 Use to select [SET].
• The current setting is displayed on the monitor.
Clearing already registered settings
Use to select [RESET].
• Registered settings are canceled.
4 Press the i button.
5 Select either of the [MY MODE SETUP] settings on the menu and
press the i button.
• Select [YES] and press the i button to set the My Mode you can use.
My Mode setting