Filter
Top Products
58
Flash shooting
4
Various shooting functions
Using the external electronic flash
Be sure to attach the flash to the camera before turning on the flash’s power.
1 Remove the hot shoe cover by
sliding it in the direction
indicated by the arrow in the
illustration.
• Keep the shoe cover in a safe
place to avoid losing it, and put it
back on the camera after flash
shooting.
2 Attach the electronic flash to
the hot shoe on the camera.
• If the lock pin is protruding, turn
the shoe lock ring as far as it will
go in the direction opposite to
LOCK. This will pull the lock pin
back inside.
3 Turn on the flash.
• When the charge lamp on the
flash lights up, charging is
complete.
• The flash will be synchronized
with the camera at a speed of
1/180 sec. or less.
4 Select a flash mode.
Lock pin
Lock ring