Filter
Top Products
155
Using the provided OLYMPUS Master software
10
Transferring images to a computer
Installing OLYMPUS Master
Identify the OS on your computer before installing the software.
For the latest information on compatible operating systems, visit the
OLYMPUS web site (http://www.olympus.com).
System requirements
Windows
OS Windows 98SE/Me/2000 Professional/XP
CPU Pentium III 500 MHz or higher
RAM 128 MB or more (256 MB or more recommended)
HD space 300 MB or more
Interface USB port
Monitor 1024 x 768 pixel or more, minimum 65,536 colors
Macintosh
OS Mac OS X 10.2 or later
CPU Power PC G3 500 MHz or higher
RAM 128 MB or more (256 MB or more recommended)
HD space 300 MB or more
Interface USB port
Monitor 1024 x 768 pixel or more, minimum 32,000 colors
Notes
• Only pre-installed operating systems are supported.
• To install OLYMPUS Master on a computer running Windows 2000 Professional or
Windows XP, login as a user with administrator privileges.
• QuickTime 6 or later and Internet Explorer or later must be installed on the computer
beforehand.
• For Windows XP, Windows XP Professional/Home Edition is supported.
• For Windows 2000, only Windows 2000 Professional is supported.
• For Windows 98SE, a USB driver will be automatically installed.
Notes
• If your Macintosh has no built-in USB port, its functionality may not be guaranteed
when the camera is connected to the computer via USB.
• QuickTime 6 or later and Safari 1.0 or later must be installed on your computer.
• Be sure to remove the card (drag and drop it onto the Trash icon) first before
performing the following procedures. If you skip these procedures, the computer
may not function properly, requiring you to restart it.
• Unplug the cable connected between the camera and computer.
• Turn off the camera.
• Open the camera’s card compartment cover.