Filter
Top Products
62
Various shooting functions
4
Single-frame shooting/sequential shooting
Single-frame shooting o Shoots 1 frame at a time when the shutter button is
pressed. (normal shooting mode)
Sequential shooting j Shoots 4 frames or more at 2.5 frames/sec. for as
long as the shutter button is pressed. Focus and
exposure are locked at the first frame (in S-AF, MF).
1 Press the </Y/j (Remote control/
Self-timer/Drive) button.
2 Use the control dial to set.
o Single-frame shooting
j Sequential shooting
3 Press the shutter button all the way to
take the picture.
• Press the shutter button fully and keep it
pressed. The camera will take pictures in
sequence until you release the button.
Control panel setting procedure Menu setting procedure
Notes
• Sequential shooting is not possible when [NOISE REDUCTION] (g P. 95) is set
to [ON].
• During sequential shooting, if the battery check blinks due to low battery, the
camera stops shooting and starts saving the pictures you have taken on the card.
The camera may not save all of the pictures depending on how much battery power
remains.
j
</Y/j button
: Single-frame shooting
: Sequential shooting
Viewfinder (Displayed when the </Y/j
button is used)
i Drive mode i
Menu [][Y/</j]Setting