28
If correct focus cannot be obtained
2
Things to know before shooting
2 Press the shutter button halfway until
the AF confirmation mark lights.
• The focus is locked. The AF confirmation
mark and the AF focusing frame light up in
the viewfinder.
• If the AF comfirmation mark blinks, press the
shutter button halfway again.
• The control panel screen disappears.
3 While keeping the shutter button
pressed halfway, re-compose your shot.
4 Press the shutter button all the way.
• The card access lamp blinks while the picture
is being stored on the card.
If the subject has lower contrast than its surroundings
Focus (focus lock) on a high-contrast object the same distance away as the
intended subject, recompose your shot and then take the picture.
Halfway down
AF confirmation mark
All the way down