42
Advanced shooting modes
3
Selecting the right mode for shooting conditions
3 Press the shutter button halfway.
• Focusing is performed and the AF
confirmation mark lights on the viewfinder.
• The shutter speed that has been set
automatically by the camera is displayed on the viewfinder.
4 Press the shutter button all the way.
TIPS
The shutter speed indication does not stop blinking after the aperture value is
changed.
J If the shutter speed indication is blinking when set to a high speed, set the
ISO sensitivity to a lower value or use a commercially-available ND filter (for
adjusting the amount of light).g "ISO — Setting the desired sensitivity to
light" (P. 82)
J If the shutter speed indication is blinking when set to a lower speed, set the
ISO sensitivity to a higher value.g "ISO — Setting the desired sensitivity
to light" (P. 82)
To change the EV step interval:
J In the menu, set the EV step interval to 1/3EV, 1/2EV or 1EV. g "EV step"
(P. 123)
To check the depth of field with the selected aperture value:
J Refer to "Preview function" (P. 47)
Halfway down
Underexposed when the
shutter speed indication is
blinking. Decrease the
aperture value (f-number).
Overexposed when the
shutter speed indication is
blinking. Increase the
aperture value (f-number).
Viewfinder
Shutter speed
Aperture value
Exposure mode
AF confirmation
mark
Viewfinder
Shutter speed
Aperture value
Exposure mode
AF confirmation
mark
All the way down