Filter
Top Products
57
Flash shooting
4
Various shooting functions
Flash bracketing
The camera shoots multiple frames, changing the amount of light emitted by
the flash for each shot.
1 Menu[][FL BKT]
2 Use to set.
[OFF] / [3F 0.3EV] / [3F 0.7EV] / [3F 1.0EV]
• You can change the EV step interval in the
custom menu.
g "EV step" (P. 123)
3 Press the i button.
• When the shutter button is pressed, the camera shoots 3 frames at a time in
the following order; Frame with optimum amount of light emission, frame
adjusted in - direction and frame adjusted in + direction.
External electronic flashes (optional)
In addition to the camera’s built-in flash capabilities, you can use any of the
external flash units specified for use with this camera. This enables you to
take advantage of a wider variety of flash shooting techniques to suit different
shooting conditions.
The external flashes communicate with the camera, allowing you to control the
camera's flash modes with various available flash control modes, such as TTL
AUTO and Super FP flash. The flash can be mounted on the camera by
attaching it to the camera’s hot shoe. For details, refer to the external flash’s
manual.
Functions available with external flash units
Optional
flash
FL-50 FL-36 FL-20 RF-11 TF-22
Flash control
mode
TTL AUTO, AUTO, MANUAL,
FP TTL AUTO, FP MANUAL
TTL AUTO,
AUTO, MANUAL
TTL AUTO,
MANUAL
GN (Guide
number)
(ISO100)
GN 50 (85 mm*)
GN 28 (24 mm*)
GN 36 (85 mm*)
GN 26 (24 mm*)
GN20
(35 mm*)
GN11 GN22
* Calculated based on 35mm film camera.
Notes
• The optional external flashes cannot be used with the built-in flash.
• The FL-40 optional flash cannot be used.