Filter
Top Products
68
TAKING PICTURES (Cont.)
Taking a still picture
1
Compose the picture by turning
the camera towards the subject.
2
Press the shutter button halfway
to lock the focus and exposure.
Use the focus lock if the camera
itself cannot focus on the subject
(P.93).
● The AF confirmation mark will light
up and the camera will beep once.
● The AF confirmation mark will blink
if the focus and exposure are not
locked. Please refer to SUBJECTS
THAT ARE HARD TO FOCUS,
P.92.
● If a subject is not well lit and is
difficult to focus on, the AF assist
lamp will light automatically. You
can also turn off the AF assist lamp
manually if desired. (P.157)
● To save you time, when the full-
time AF is activated, pictures
displayed on the monitor are
always already in focus. (P.95)
2, 3
P F2.8 1/30 0.0
AF confirmation mark
AF target mark
૽૽
When the flash stand-by blinks
Slide the flash switch to set the flash. See USING THE FLASH (P.72).