Filter
Top Products
51
DisplaysMenu
Setup menu list
SCENE FILE screen
Item
Display
mode
Description of settings
SCENE
SELECT
(Camera)
Selects the settings (SCENE FILES) according to the variety of shooting
circumstances.
You can read, save, and initialize these settings from MENU - SCENE FILE -
LOAD / SAVE / INIT.
F1, F2, F3, F4, F5, F6
OPERATION
TYPE
(Camera)
Switches the shutter and frame rate operation to video type or film type.
FILM CAM:
VFR operation is enabled. SLOW shutter speeds are disabled.
SYNCHROSCAN is displayed as an angle. Gain is displayed as ISO.
VIDEO CAM:
VFR operation is disabled. SLOW shutter speeds are enabled.
SYNCROSCAN is displayed as 1/n. Gain is displayed as dB.
REC FORMAT (Camera)
Selects the recording format.
When SYSTEM FREQ = 59.94 Hz
PH 1080/24P and PH 720/24P represent native recording.
PH 1080/60i, PH 1080/30P, PH 1080/24P, PH 720/60P, PH 720/30P, PH 720/24P,
HA 1080/60i, HE 1080/60i
When SYSTEM FREQ = 50 Hz
PH 1080/50i, PH 1080/25P, PH 720/50P, PH 720/25P, HA 1080/50i, HE 1080/50i
VFR MODE (Camera)
ON: Enables the VFR (Variable Frame Rate) mode.
OFF
:
Disables the VFR mode.
Functions only when REC FORMAT is set to 1080/24P, 1080/30P, or 1080/25P.
Functions only when OPERATION TYPE = FILM CAM
Does not function when SDI 24PsF is set to ON.
Audio cannot be recorded when VFR MODE = ON.
FRAME RATE (Camera)
Sets the FRAME RATE.
Operates only when OPERATION TYPE = FILM CAM.
You can make the settings from SHUTR/F.RATE on the rear side of the camera
also.
When SYSTEM FREQ = 59.94 Hz
12/15/18/20/21/22/24/25/26/27/28/30/32/34/36/40/44/48/54/60
When SYSTEM FREQ = 50 Hz
12/15/18/20/21/22/23/24/25/26/27/28/30/32/34/37/42/45/48/50
SYNCRO
SCAN
(Camera)
Adjusts the synchro scan shutter speed used for shooting images on a TV
screen, etc.
Holding the OPERATION lever toward the
or will cause the values to change
at a faster rate.
When OPERATION TYPE = VIDEO CAM and SYSTEM FREQ = 59.94 Hz
60P/60i: •
1/60.0…1/250.6
30P: •
1/30.0…1/48.0…1/250.6
24P: •
1/24.0…1/48.0…1/250.6
When OPERATION TYPE = VIDEO CAM and SYSTEM FREQ = 59.94 Hz
50P/50i: •
1/50.0…1/250.0
25P: •
1/25.0…1/48.0…1/250.0
WhenOPERATIONTYPE=FILMCAM,“deg(angle)”Display
10.0d…172.8d…180.0d…360.0d (0.5d/div)
indicates the factory setting.