47
Displays
Remaining battery capacity may not be •
displayed correctly when using in high or
low temperatures, or when the battery has
not been used for a long period of time.
To ensure that remaining battery capacity
is displayed correctly, use the battery
completely from a fully-charged state, and
charge the battery again. (Remaining battery
capacity may still not be displayed correctly if
the battery has been used for long periods in
high or low temperatures, or if the battery has
been recharged a large number of times.)
The remaining battery capacity display is •
a guideline and may change according to
usage conditions.
The remaining battery capacity display will •
momentarily disappear when switching
between modes, when conducting REC
CHECK operations or when changing the LCD
brightness since the capacity is recalculated at
these times.
Not displayed when using AC adaptor.•
23 Operation status display
(Red) : Recording
(Green): Playback paused
: Playback
(White): Playback paused
INDEX [ ]
: Playback paused at INDEX
position
( ): Frame-by-frame playback
(Frame-by-frame reverse
playback)
( ): Skip (reverse skip)
( ): Fast forward/fast playback
(Rewind/fast reverse playback)
( ): Paused in final scene (paused in
initial scene)
Self-portrait recording display
No display: Cannot record (no card, etc.)
: Recording in progress, during transition to
the recording pause mode
: Recording paused (recording standby)
: Warning display
24 Recording function display
PRE-REC
:When pre-rec mode is ON
:In interval REC mode
25 Monitor audio level meter
When you press the AUDIO MON/ADV button,
the sound volume output from the built-in
speaker and headphone jack is displayed.
26 Safety zone
The range of the zone is indicated by the
SAFETY ZONE item (Page 59) on the
DISPLAY SETUP screen.
90%: Range that can be displayed on an
ordinary home-use TV set.
4:3: Range cropped to 4:3
14:9: Range in between 16:9 and 4:3
2.35:1: Cinema scope range
2:1 : 2:1: Scope range
1.85:1: American visa range
GRID: Horizontal/vertical grid lines
27 Metadata recording information
META
: When metadata recording is ON
No display: When metadata recording is OFF
28 Recording audio type display
LPCM
: When audio LPCM recording
AC3
: When audio AC3 recording
29 FOCUS_BAR display
Displays the above items in the bottom left of
the LCD/EVF. Digitizes and displays high-
frequency component volumes for videos.
White bar: focus bar display
Green line: peak display
30 IRIS METER display
Displays the above items in the bottom right of
the LCD/EVF.
Center: Indicates the normal light intensity.
Right: Indicates high-light intensity.
Left: Indicates low-light intensity.
Green dots on display:
Indicate the compensation amount
during AUTO IRIS.
31 AREA frame display
Displays the range of the AREA function.